PO6/PWO
PO6/PWO
|
PO6 Cooling and Lubricating on metal working machines
Deep hole drilling machines
General purpose pumping for low lubricating property fluids
Central units for heat exchange and energy recover
Light fuel oils recirculation
Tanks filling and oils/fuel oils transfer.
|
|
|||
|
Admissible delivery pressure
|
Up to 100 bar continuos at 2900 rpm
|
|||
|
Admissible suction pressure
|
From -0,5 to 10 bar
|
|||
|
kinematics viscosity
|
From 1 to 10 cSt typical and up to 400 cSt (
|
|||
|
Admissible temperature
|
0 to 60 °C
|
|||
|
Driving speed
|
2900 to 3600 rpm
|
|||
|
Direction of rotation
|
Clockwise, as seen from the driving side
|
|||
|
PWO For cooling lubricants with low vosicosity and minimum lubricating properties (minimum oil 4%)
Main field of application:
Machine tools high pressure cooling systems
|
|
|
Delivery flow
|
14 to 100 l/min (3,7 to 26,4 USGPM)
|
||
|
Admissible delivery pressure
|
up to 100 bar (1450 psi) 2900 to 3500 rpm
|
||
|
Admissible suction pressure
|
0,5 to 10 bar (-7,3 to 145 psi)
|
||
|
kinematics viscosity
|
1 (min oil 4%) to 10 cSt
|
||
|
Admissible temperature
|
0 to 100° C (32 to 212°F)
|
||
|
Driving speed
|
2900 to 3500 rpm
|
||
|
Raccomanded filtration
|
40 micron max, suction side (not abrasive containant) ISO4406 19/16-NAS10
|
||
|
Average noise level
|
60-75 dB (A) at 2900 rpm accordinig to pump dimension
|
||
|
Direction of rotation
|
Clockwise, as seen from the driving side
|
||
|
For further information please make registration
|
